End Assemblies
EAG END ASSEMBLY
Eag Includes :
- 1 x 2100mm x 100nb Post
- 1 x 100nb Post Cap
- 1 x 3250mm x 50nb Stay
- 1 x Nut & Bolt
Hinges to suit available
Hot Dip Galvanised after fabrication
FPEAG Footplate & Assembly
FPEAG INCLUDES:
- 1 x 2100mm x 100nb Post
- 1 x 100nb Post Cap
- 1 x 3250mm x 50nb Stay
- 1 x 480mm x 400mm x 3mm Footplate
- 1 x Threaded Rod, Nut, Bolt & Washer
Hinges to suit available
Hot Dip Galvanised after fabrication
INSTALLATION: It´s as simple as this…
- Concrete/drive in post
- Attach stay to post
- Attach footplate to stay
- Thread rod through post and footplate
- Place footplate on soil and tension rod to increase down pressure on footplate
- Place cap on post
- Allow to cure before tying wires if using concrete.
DFPEAG DRIVEABLE FOOTPLATE END ASSEMBLY
DFPEAG INCLUDES :
- 1 x 2100mm x 100nb/75×75 Driveable Post
- 1 x 100nb Post Cap
- 1 x 3250mm x 50nb Stay
- 1 x 480mm x 400mm x 3mm Footplate
- 1 x Threaded Rod, Nut, Bolt & Washer
Hinges to suit available
Hot Dip Galvanised after fabrication
INSTALLATION: It´s as simple as this…
- Drive in post
- Hammer steel pickets through keepers provided
- Attach stay to post
- Attach footplate to stay
- Thread rod through post and footplate
- Place footplate on soil and tension rod to increase down pressure on footplate
- Place cap on post
DEAG:DS DRIVEABLE END ASSEMBLY WITH DRIVEABLE STAY
DEAG:DS INCLUDES:
- 1 x 2100mm x 100nb/75×75 Driveable Post
- 1 x 100nb Post Cap
- 1 x 3250mm x 50nb Stay
- 1 x 400mm x 200mm Driveable Stay Block
- 2 x Nut & Bolt
Hinges to suit available
Hot Dip Galvanised after fabrication
INSTALLATION: It´s as simple as this…
- Drive in post
- Hammer steel pickets through keepers provided
- Attach stay to post
- Attach stay to post
- Thread rod through post and footplate
- lace stay block in correct position and hammer into ground, removing soil under stay to enable stay block to be completely buried
- Place cap on post
EAQS END ASSEMBLY QUIKSTAY
- Ideal for electric fencing around dams, sheds, laneways, roadsides, crops and strip grazing.
Hinges to suit available
INSTALLATION: It´s as simple as this…
- Position the quikstay drive in the steel picket through the main tube
- Drive in the short steel picket through the stay end
