Stay Options

• 1 x 3250mm x 50nb stay
• 1 x nut & bolt

Hinges to suit available

Hot Dip Galvanised after fabrication

INSTALLATION: It´s as simple as this…

1. Attach to post
2. Concrete in stay

• 1 x 3250mm x 50nb stay/li>
• 1 x 480mm x 400mm x 3mm footplate
• 1 x threaded rod, washers, nut & bolt

Hinges to suit available

Hot Dip Galvanised after fabrication

INSTALLATION: It´s as simple as this…

1. Attach to post
2. Concrete in stay
3. Thread rod through post and footplate
4. Place footplate on soil and tension rod to increase down pressure on footplate

• 1 x 3250mm x 50nb stay
• 1 x 200mm x 400mm drivable stay block
• 2 x nut & bolt

Hinges to suit available

Hot Dip Galvanised after fabrication

INSTALLATION: It´s as simple as this…

1. Attach to post
2. Attach stay block to stay
3. Place stay block in correct position and hammer into ground, removing soil under stay to enable stay block to be completely buried

• 1 x galvanised pipe stay
• 1 x 200mm x 300mm x 6mm footplate
• 1 x threaded rod tension kit

Hinges to suit available

Hot Dip Galvanised after fabrication

INSTALLATION: It´s as simple as this…

1. Make a hole in post and slip stay into it – either square or round.
2. Chainsaw a slot in post – squash end of stay – preferably vertical.
3. Insert a coach screw into the post – slip stay over to hold in place [threaded rod keeps it tensioned].